Lockout signs are warnings that we post on equipment, panels or access points. These signs tell us that we need to follow a lockout procedure before we service, enter or operate the equipment under certain conditions. Lockout signs are a part of any facility's hazardous energy control program.

Lockout signs cover all types of energy, including hydraulic, pneumatic, mechanical, thermal and chemical energy. If a machine stores or transmits any kind of energy that could hurt a worker during servicing, then a lockout sign is necessary for that machine.

The main standard is OSHA 29 CFR 1910.147. This standard requires employers to set up a program to control energy and use methods like signs and tags to tell workers about lockout requirements. Another standard, OSHA 29 CFR 1910.145, sets rules for the design and use of signs and tags that prevent accidents.

We typically place lockout signs on equipment that needs lockout procedures before maintenance. We also put them on panels and disconnect switches, control rooms and machine access doors. You will also find lockout signs at the entrance to restricted equipment areas and near any point where workers interact with energy isolation during servicing.

Yes, we can use lockout signs alongside safety labels on the same machine. It is common to have multiple labels on one machine, each addressing a different hazard or procedure. Lockout signs work well with machine hazard labels, pinch point warnings, notices about protective equipment and emergency stop labels.

Lockout signs do not have an expiration date. However, they must be replaced if they become damaged, faded or hard to read. When safety inspections are done, check that lockout signs are still easy to read and in the right position on each piece of equipment.

Yes, StickerJet lockout signs follow the ANSI Z535 formatting standards. This means StickerJet lockout signs are designed to be clear and easy to understand.

Hazard signs come in different sizes. Some common sizes for hazard signs are 3.5" x 5", 5" x 7", 7" x 10", 10" x 14" These sizes ensure that hazard signs are visible and easy to read. Hazard signs need to be big enough to grab people's attention and small enough to fit in the space available.